Get Custom Virtual Training the Way You Need It!   Learn More

Incident Prevention Magazine

Jeff Steiner

The Safe Use of Outrigger Pads for Equipment Stability

Web-Clip0001.00_00_51_02.Still001

An outrigger pad is a safety tool that can be used with any equipment that has outriggers, down jacks or stabilizers. It is a must for stability when a piece of equipment – such as a crane – lifts loads or personnel aloft. This article will provide an overview of outrigger pads, including how to use them safely and what kinds of pads are available on the market today.

The Basics
Outrigger pads are placed on the ground under the equipment’s outrigger, shoe, float or foot. The size and thickness of the outrigger pads to be used should be selected based upon the type of equipment, soil conditions of the work site and type of lift being performed.

When working with outrigger systems, it’s important to understand that the point of contact between an outrigger and the ground is quite small. Because of the pressure of the outrigger, the ground underneath may shift, be displaced or collapse if an outrigger pad is not used. If any of those things happen, there is the potential for the equipment to shift or tip the load, which could lead to the equipment toppling over. In fact, approximately half of crane lifting accidents are caused by improper use of outriggers.

Continue reading
Recent comment in this post
Guest — Chris Bluethman
Does anyone make some type of sensor where machine won't operate unless outriggers are completely down?
Thursday, 23 July 2020 15:33
  4217 Hits
  1 Comment

KNOWLEDGE, INSIGHT & STRATEGY FOR UTILITY SAFETY & OPS PROFESSIONALS

360 Memorial Drive, Suite 10, Crystal Lake, IL 60014 | 815.459.1796 | This email address is being protected from spambots. You need JavaScript enabled to view it.
© 2004 - 2020 Incident Prevention. All Rights Reserved.