Incident Prevention Magazine

Dan Brenden

Using Technology to Eliminate Aerial Device Overloads

Web-Terex-JOBSIT-2_PM_5in-new-logo

Knowing bucket capacity and understanding how to read a jib load chart are two critical elements of aerial device operation. While both tasks are fairly straightforward, it is crucial to stay within the allowable capacity of the unit. The platform capacity and material-handling capacity provided by the manufacturer are not recommendations – they are absolute maximum capacities that ensure the machine is not overloaded. Overloading equipment can result in overturning or boom failure. Equipment damage also may occur, resulting in costly repairs and a shortened usable life for the aerial device.

A fully equipped lineworker with PPE plus tools and materials for typical line maintenance can quickly add up to 700 pounds or more for distribution work, and upward of 1,000 pounds for transmission work. Bucket capacity is identified on the ID plate and inside of the basket on most aerial devices. In addition, be aware of dual-rated buckets with different capacities based on configuration and use as a material handler; these types of buckets are available from some manufacturers. Before climbing in, lineworkers should verify that their weight – in addition to the platform liner, if used, and all of their tools and equipment – doesn’t exceed the bucket’s capacity.

“Don’t forget to account for boots, harness, tools and any components you may add to the bucket once you are elevated,” said Kyle Wiesner, aerial products engineering manager for Terex Utilities. “Tools such as phase lifters, crimpers, hydraulic drills or chain saws all add up. Weight of personal clothing can change with the weather, so don’t forget to recalculate come winter. If a component is in the bucket while work is being performed, that weight needs to be factored in as well.”

Continue reading
  2743 Hits
  0 Comments

KNOWLEDGE, INSIGHT & STRATEGY FOR UTILITY SAFETY & OPS PROFESSIONALS

Incident Prevention is produced by Utility Business Media, Inc.

360 Memorial Drive, Suite 10, Crystal Lake, IL 60014 | 815.459.1796 | This email address is being protected from spambots. You need JavaScript enabled to view it.
© 2004 - 2019 Incident Prevention. All Rights Reserved.