In 2005 OSHA published proposed rule changes to 1910.269 and 1926 subpart V. Today we received the notification below from the Department of Labor.
On April 22 a panel discussion will be held at the iP Utility Safety Conference will review the major changes found in the revised rules, as well as compliance issues, strategies and time frames for implementation of the new rules. Subject matter experts will be on hand to answer questions from participants.
WASHINGTON - The Occupational Safety and Health Administration today announced that it would be issuing a final rule to improve workplace safety and health for workers performing electric power generation, transmission and distribution work.
"This long-overdue update will save nearly 20 lives and prevent 118 serious injuries annually," said Dr. David Michaels, assistant secretary of labor for occupational safety and health. "Electric utilities, electrical contractors and labor organizations have persistently championed these much-needed measures to better protect the men and women who work on or near electrical power lines."
OSHA is revising the 40-year-old construction standard for electric power line work to make it more consistent with the corresponding general industry standard and is also making some revisions to the construction and general industry requirements. The updated standards for general industry and construction include new or revised provisions for host and contract employers to share safety-related information with each other and with employees, as well as for improved fall protection for employees working from aerial lifts and on overhead line structures. In addition, the standards adopt revised approach-distance requirements to better ensure that unprotected workers do not get dangerously close to energized lines and equipment. The final rule also adds new requirements to protect workers from electric arcs.
General industry and construction standards for electrical protective equipment are also revised under the final rule. The new standard for electrical protective equipment applies to all construction work and replaces the existing construction standard, which was based on out-of-date information, with a set of performance-oriented requirements consistent with the latest revisions of the relevant consensus standards. The new standards address the safe use and care of electrical protective equipment, including new requirements that equipment made of materials other than rubber provide adequate protection from electrical hazards.
The final rule will result in estimated monetized benefits of $179 million annually, with net benefits equal to about $130 million annually.
Additional information on the final rule is available at http://www.osha.gov/dsg/power_generation/. The final rule becomes effective 90 days after publication in the Federal Register. OSHA adopted delayed compliance deadlines for certain requirements.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.
KNOWLEDGE, INSIGHT & STRATEGY FOR UTILITY SAFETY & OPS PROFESSIONALS
Incident Prevention is produced by Utility Business Media, Inc.
© 2004 - 2019 Incident Prevention™. All Rights Reserved.