Incident Prevention Magazine

Michael S. Haro, Ph.D., CBSS

Behavior Safety Training for Safety Committee Members

Behavior Safety Training for Safety Committee Members

Industries concerned about bottom-line expenses tend to place behavior safety training low on the priority list. However, consider the direct costs your company paid for incidents, accidents, injuries, lost time, lost productivity, and damage to equipment or facilities during the past year. This article will outline a training program that can create significant safety advances as well as immeasurable returns on safe work practices.

Continue reading
  11719 Hits
  0 Comments
ET&D Strategic Partnership Task Team IV

Strategic Safety Partners

Strategic Safety Partners

In 2004, the Occupational Safety and Health Administration (OSHA) entered into the Electrical Transmission & Distribution (ET&D) Strategic Partnership agreement with six electrical contractors: Asplundh Tree Expert Co., Henkels & McCoy, MDU Construction Services Group, MYR Group, Pike Electric and Quanta Services; one union: the International Brotherhood of Electrical Workers (IBEW); and two trade associations: the National Electrical Contractors Association (NECA) and Edison Electric Institute (EEI). The primary objective of this partnership is to improve worker safety in the high-voltage electric line construction industry. Members of the partnership have renewed their agreements with OSHA and expanded in 2006, 2008, 2010 and, most recently, in 2011 with the addition of MasTec and Power Line Services to the list of membership partners. Today the ET&D Strategic Partnership is one of only a few national partnerships between employers and the federal job safety agency, and covers an estimated 80 percent of total workers in the line construction industry.

Continue reading
  17824 Hits
  0 Comments
Jim Vaughn, CUSP

The Intersect: A Practical Guide to Work-Site Hazard Analysis

The Intersect: A Practical Guide to Work-Site Hazard Analysis

A hazard is essentially a condition or activity that, if left uncontrolled, may result in an accident or a serious injury. To effectively identify hazards, the observer must develop a means of recognizing a hazard exposure. What I see repeatedly in the field are hazard lists like “wear PPE, stay out of the bite, watch for cars, cover up well.” What I don’t see is an effective approach to identifying hazards. I had occasion to investigate a 4-kV contact in a metal-clad breaker where the worker brushed his hand against a control power transformer that had not been identified or tested. For three days he had his head in the cabinet, unaware that the primary leads for the transformer had been moved from the load side to the high side of the breaker contacts. For three days his pre-job hazard analysis entries included “check for voltage.” He survived, but not because of his hazard analysis.

Continue reading
  9593 Hits
  0 Comments
Mike Caro, CUSP

Integrity and Respect: Two of Our Most Important Tools

Integrity and Respect: Two of Our Most Important Tools

Few things are more difficult to establish or easier to lose than integrity. As safety professionals, if our workers, bosses and peers see us as people of integrity, we can ask things of them with a very real expectation that they will buy in, comply, participate and change. The level to which they will do these things is always a matter of degree, but trust built over time gives us options we otherwise do not have. Because integrity is such a key component of our success, it is worthwhile to spend some time considering how to build it, how to maintain it and what can destroy it. Many of these ideas are of particular importance to someone who is new to an organization or work group, but the applicability is in no way restricted to just these persons.

Continue reading
  22383 Hits
  0 Comments
Mike Woods, CUSP

Keys to Effective Fall Protection

Keys to Effective Fall Protection

The electric utility industry is loaded with potential hazards. Climbing at heights is one of those inherent safety risks that come with the job. At Louisville Gas and Electric (LG&E) and Kentucky Utilities (KU), we require 100 percent fall protection on poles and towers for our employees and business partners. This policy is part of our “no compromise” approach to safety and supports our belief that we can leave nothing to chance when it comes to the well-being of our workers.

Continue reading
  9335 Hits
  0 Comments

KNOWLEDGE, INSIGHT & STRATEGY FOR UTILITY SAFETY & OPS PROFESSIONALS

Incident Prevention is produced by Utility Business Media, Inc.

360 Memorial Drive, Suite 10, Crystal Lake, IL 60014 | 815.459.1796 | This email address is being protected from spambots. You need JavaScript enabled to view it.
© 2004 - 2019 Incident Prevention. All Rights Reserved.