Worksite Safety Archives

Web-Craig-Lindquist-on-60kV-line---Silicon-Valley-Power-100_0564.jpg

Marking a Safety Milestone at Silicon Valley Power

Written by Damon Beck on April 18, 2017. Posted in Safety Management, Worksite Safety.

Clear minds, focused on the task at hand. Strict attention to details and checklists critical to the job. Precise and continual communication among the field, management and control teams. Ongoing training and safety manual review. Looking out for one another. Trust in the workforce’s skills with no micromanagement and with the boss’ door always open. Such are the written – and unwritten – rules governing the field forces of Silicon Valley Power, the City of Santa Clara, Calif.’s municipal electric utility that recently marked a company milestone: 1,000 days without a lost day of work due to...

Using Thermography for Underground Worker Safety

Written by Peter Tyschenko and Michael Meathe on April 18, 2017. Posted in Safety Management, Worksite Safety.

For more than 100 years, Commonwealth Edison – commonly known as ComEd – has been powering the lives of customers across Northern Illinois, including those in Chicago, a city that has thousands of circuit miles of medium-voltage distribution cables installed in conduit and manhole systems. Over the decades, ComEd’s underground cable splicers have experienced failures of distribution cable system components, including cables, joints and terminations, while employees were working in manholes and vaults. A large number of cable system failures occurred at cable joints in underground manholes....

Train the Trainer 101: Addressing Common Fall Protection Questions and Concerns

Written by Jim Vaughn, CUSP on April 18, 2017. Posted in Safety Management, Worksite Safety, Train the Trainer 101.

To begin this article, I want to offer a disclaimer. One of the reasons the “Train the Trainer 101” series was created is to examine the practical aspects of compliance as they relate to the utility industry. We do that by reading the statutes, looking at how OSHA interprets and enforces the rules, reviewing what the consensus standards state and then determining practical ways the employer can manage and comply with the rules. Sometimes I raise an eyebrow, but in working with the group of professionals who review every article published in Incident Prevention’s pages, we endeavor to ensure...

April 2017 Q&A

Written by Jim Vaughn, CUSP on April 18, 2017. Posted in Safety Management, Worksite Safety, Q & A.

Q: Our plant safety committee has a longtime rule requiring electrical hazard safety shoes for our electricians. We were recently told by an auditor that we have to pay for those shoes if we require employees to wear them. We found the OSHA rule requiring payment, but now we wonder if we are really required to use the shoes. Can you help us figure it out? A: Sure, we can help. But first, please note that Incident Prevention and the consultants who have reviewed this Q&A are not criticizing a rule or recommending a rule change for any employer. What we do in these pages is explain background,...

Frontline Fundamentals: Risk Tolerance

Written by David McPeak, CUSP, CIT, CHST, CSP, CSSM on April 18, 2017. Posted in Safety Management, Leadership Development, Worksite Safety, Frontline Fundamentals.

A fundamental premise of working safely is that hazards must be identified and then controlled. Too many incidents occur because hazards are not identified, or worse, they are identified but ignored or tolerated. One of my favorite ways to introduce the concept of risk tolerance is to ask a Frontline class this simple question: “What are some things you might hear someone say before something really bad happens?” It always amazes me – and scares me – how open participants are when I ask this question. Typical responses I have heard include:• “We’ve done this a thousand times and no one has ever...

Equipotential Grounding: Lessons Learned in the Field

Written by Dwight Miller on February 15, 2017. Posted in Safety Management, Worksite Safety, Grounding.

When the earliest linemen first began to ground lines for worker protection, they attached a small chain – known as a ground chain – to the conductors, with the end dropped to the ground. When I began to work on a line crew, I’m sad to say that my grounding practices weren’t much better than those used in the early days. I wish someone had better explained to me then the situations that could arise, the ways grounding could protect me and the best methods to accomplish it. So, in an effort to help out other lineworkers in the electric utility industry, I want to share in the following pages...

Understanding and Preventing Lower Back Pain in the Electric Utility Industry

Written by Dr. Andrew Murro, DC, DABCO on February 15, 2017. Posted in Safety Management, Worksite Safety.

“I don’t know what I did to cause this injury, Doc. I’ve had lower back pain on and off for the past five years, but it’s never been like this before. All I did was reach under the boom for a roll of cable on the truck when I felt something give in my back and then felt shooting pain down both legs. What the heck happened?” This is not an unusual story. When I used to practice as a chiropractic orthopedist, I heard similar accounts on a daily basis. Lower back pain affects utility workers in epidemic proportions. In 2004, my company surveyed 224 employees of a public electric utility, and the...

Maximizing Your Arc-Rated Gear

Written by Hugh Hoagland and Stacy Klausing, M.S. on February 15, 2017. Posted in Safety Management, Worksite Safety.

When designing your PPE program, how do you know which option will work best for your application? How can you get the most for your money? How can you get no-cheating compliance from your workers? With so many arc-rated (AR) and flame-resistant (FR) PPE products on the market, it can be difficult for a utility or utility contractor to make a sound decision. To start, complete an analysis to determine hazard levels, as well as the workers who will be exposed. Application, comfort and cost should be considered when deciding on the best product to purchase. In this article, we will help you see...

Train the Trainer 101: The New Walking-Working Surfaces Final Rule

Written by Jim Vaughn, CUSP on February 15, 2017. Posted in Safety Management, Worksite Safety, Train the Trainer 101.

OSHA’s final rule on 29 CFR 1910 Subpart D, “Walking-Working Surfaces,” is finally here. It’s 26 pages of nine-point font equaling 21,675 words, and I read them all. It’s big, and if you include the preamble in your analysis, it is also complicated. It was just as hard to write about as it was to read. I guess that shouldn’t be unexpected for a final rule that has been in the works since 1983. The original 1910 Subpart D was published in 1971. The first update was proposed in 1983, but it was never ratified. Proposals were again considered in either the Construction standard or the General Industry...

Tag: Worksite Safety