Tag: ppe

Voice of Experience: PPE Regulatory and Consensus Standard Requirements

OSHA 29 CFR 1910 Subpart I and 1926 Subpart E cover the requirements of personal protective and lifesaving equipment. With the publication of OSHA’s final rule in April 2014, the general industry and construction standards are now essentially the same for electric utilities, and there are few if any differences in the PPE required by each standard. In addition to OSHA’s regulatory standards, there are ANSI/ASTM and other consensus standards that govern the manufacturing, type and ratings for all PPE. These consensus standards change as the industry evolves and PPE improves. All PPE should meet...

Continue reading

Figure 4 Web

Train the Trainer 101: Practical MAD and Arc Flash Protection

Author’s Note: Before we get to the article, I want to thank the members of Incident Prevention’s editorial advisory board for their help in assembling this installment of “Train the Trainer 101.” They help me keep my head on straight, especially when I have ideas that are way outside the box. Even though I am also on the board, they still hold me to high standards of accountability and accuracy. These folks are a great asset to iP and make better writers of everyone who contributes to the publication. Over the past year, iP subject matter experts have fielded many questions about how to meet...

Continue reading

N95-2-Web.jpg

N95 Filtering Face Pieces: Where Does Your Organization Stand?

When it comes to following health and safety standards, nearly every worker tries to do the right thing. And when workers deviate from standards and best practices, it is typically due to lack of knowledge and proper training. One industry topic that is not yet fully understood and continues to be heavily debated is the N95 filtering face piece, in particular its uses and program requirements. In response, this article seeks to assist those who are involved with the development and enforcement of their organization’s voluntary respiratory protection policy. To begin, there are two reasons why...

Continue reading

Faried-2-Web.jpg

Arc Flash Mitigating Technologies and the OSHA Final Rule

On April 11, 2014, OSHA issued the final rule regarding 29 CFR 1910.269 and 1926 Subpart V. The final rule included modifications that address minimum approach distances, fall protection systems and hazards of electric arcs. Since the publication of the rule, there have been an extensive number of articles published that detail changes to 1910.269 and 1926 Subpart V. Those articles focus on explaining the changes but most lack information about arc flash mitigating technologies. This article focuses on current technologies available to minimize and prevent exposure of workers to arc flashes....

Continue reading

Sang-2-Web.jpg

How to Navigate the FR Clothing Marketplace

When the original version of the OSHA 1910.269 standard was published, flame-resistant (FR) clothing wasn’t even mentioned. The dangers associated with electric arcs were known, but the standard only required that an employer not allow an employee to wear clothing that, when exposed to flames or electric arcs, could increase the extent of injury sustained by the employee. This was covered under 1910.269(l)(6)(iii). The rule eliminated the use of garments constructed with synthetics such as polyester, nylon, rayon and acetate, which could melt and drip, and led to the adoption of clothing made...

Continue reading

Vaughn 1

Train the Trainer 101: Back to Basics: ‘Gentlemen, This is a Football’

I recently spent several weeks studying an incident, trying to understand how it had happened and – more importantly – how it could have been prevented. Maybe the answer was associated with human performance, or maybe culture, or it could have been procedures, or … well, maybe it could have been associated with any number of things. In other words, even with all of my experience and training, I had a hard time finding the singular root cause. This dilemma made me recall a question I missed on an engineer-in-training exam I took in the 1970s. The question had ladder diagrams and loop schematics...

Continue reading

Voice of Experience: Fundamentals of Underground Padmount Transformers

In recent months Incident Prevention has received several questions about underground (UD) padmount transformers, so in this installment of “Voice of Experience,” I’d like to take the time to cover the general aspects of these types of transformers. To begin, there are a few different types of single-phase and three-phase UD padmounts: live front with exposed live primary parts, 600-amp bolt-on elbows and loop feed with bushings and elbows. All of these transformers are available in several voltage ranges. The proper PPE must be worn when an employee is opening, entering and working on energized...

Continue reading

June 2015 Q&A

Q: Are there any changes to steel-toe boot requirements for lineworkers in the recently revised OSHA 1910.269 standard? A: OSHA still leaves it to employers to decide whether hard-toe or protective footwear is required. As with all other PPE, the decision should be made based on risks and history. Wearing safety footwear is not required by the PPE rule. However, what is required in OSHA 29 CFR 1910.136, “Foot protection,” is a mandatory assessment of the work environment. The rule states that the employer “shall ensure that each affected employee uses protective footwear when working in areas...

Continue reading

Hunt-2-Web.jpg

The Roller-Coaster Life Cycle of IEEE 1307

IEEE 1307 is a little-known work group that is part of a larger IEEE subcommittee known as ESMOL, which stands for Engineering in the Safety, Maintenance and Operation of Lines. Both IEEE 1307 and ESMOL fall under the umbrella of the IEEE Transmission and Distribution Committee. IEEE 1307 is also the title of a utility fall protection consensus standard that has existed since the early 1990s. In light of the recent OSHA changes to fall protection, it seems appropriate to spread the knowledge about this industry standard. In the BeginningIn the early 1990s it became apparent that falls were...

Continue reading

Incident Prevention Magazine

360 Memorial Drive, Suite 10, Crystal Lake, IL 60014 | 815.459.1796

Get the Incident-Prevention Digital Edition App
Get the Incident-Prevention Digital Edition App

Get the iP Digital Edition App


© All rights reserved.
Back to Top