Tag: Equipment Operations

Voice of Experience: Switching and Working on UD Systems

I was recently asked to provide information about the challenges and opportunities found when working on direct-buried underground distribution (UD) systems. In light of that request, I’ll address those topics in this installment of “Voice of Experience.” My first opportunity to work on UD systems was as a truck driver operating a trencher in the late 1960s. UD systems were fairly new at the time; lineworkers were learning new techniques, using different types of tools to terminate cables and installing switchable elbows. In that day, some elbows were non-load-break. Back then the work was all...

Continue reading

December 2016 Q&A

Q: We hear lots of opinions on whether a lineworker can lift a hot-line clamp that has a load on it. There is a rule that says disconnects must be rated for the load they are to break. We’ve been doing it forever. Are we breaking an OSHA rule or not? A: Incident Prevention has answered this question before, but it won’t hurt to revisit it and use the opportunity to explain how OSHA analyzes a scenario to see if it’s a violation. Most objections to operating a hot-line clamp (HLC) under load are based on OSHA 29 CFR 1910.269(l)(12)(i), which states that the “employer shall ensure that devices...

Continue reading

October 2016 Q&A

Q: What is meant by the phrase “circulating current” as it pertains to transmission towers? Does it have something to do with the fact that there is no neutral? A: We’re glad you asked the question because it gives us an opportunity to discuss one of the basic principles of the hazard of induction. More and more trainers are teaching with a focus on principles instead of procedures, and we often overlook some of these basic definitions. The concept of circulation is associated with what happens in any interconnected electrical system. Refer to the basic definition for parallel paths: Current...

Continue reading

August 2016 Q&A

Q: We have heard that OSHA can cite an employer for violation of their own safety rules. How does that work? A: OSHA’s charge under the Occupational Safety and Health Act is the protection of employees in the workplace. The agency’s methodology has always assumed the employer knows – or should know – the hazards associated with the work being performed in the employer’s workplace because that work is the specialty of the employer. OSHA’s legal authority to use the employer’s own safety rules as a reason to cite the employer is found in CPL 02-00-159, the Field Operations Manual (FOM), which...

Continue reading

Train the Trainer 101: Practical Recommendations for Wire Stringing

In the last installment of “Train the Trainer 101,” we discussed grounding when stringing in energized environments (see http://incident-prevention.com/blog/train-the-trainer-101-grounding-for-stringing-in-energized-environments). Many readers responded with questions regarding the myriad issues they have faced during stringing. I learned a lot about this type of work during my first 25 years in the trade. In stringing hundreds of miles of conductor, I am proud to say I never dropped wire. I also have to say it’s most likely I have that record because I learned a great deal from other workers’...

Continue reading

June 2016 Q&A

Q: Is a transmission tower leg considered a lower level? And is there an exception for hitting a lower level when someone is ascending in the bucket truck to the work area? Our concern is that the shock cord and lanyard could be long enough that the person could hit the truck if they fell out of the bucket prior to it being above 15 feet. A: The February 2015 settlement agreement between EEI and OSHA addresses both of your questions, which, by the way, were contentious for several years until this agreement. The settlement agreement includes Exhibit B (see www.osha.gov/dsg/power_generation/SubpartV-Fall-protection.html),...

Continue reading

Train the Trainer 101: Grounding for Stringing in Energized Environments

A few years ago I came upon a crew using 6-inch chocks to hold back a 38-ton crane truck. I told the crew I was happy that they were making an effort at compliance, but I had to ask them, “Why do we place chocks under a truck’s wheels? Is it to comply with our safety rules or to keep the crane from running away?” It was obvious to me that the short chocks would not hold the crane. The driver proved my assumption true a few minutes later. From the cab, with the transmission in neutral, he released the parking brake. The crane easily bounced over the chocks and, unfortunately, hit my pickup truck. Sometimes...

Continue reading

Jarred-ODell---1---Stepped-System-Web.jpg

Trenching by the Numbers

By and large, organizations directly provide the training and other resources needed for the development of their foremen and crew chiefs. Such training tends to be built around two components: following the standards set forth by OSHA and other regulatory agencies, and adhering to organizational policies and procedures. This is a great approach but perhaps an incomplete one. Truly impactful safety training typically includes a third component: sharing of personal experience. For instance, I once observed a training session in which the instructor drew from his experiences during a discussion...

Continue reading

Stringing-01-Web.jpg

Stringing Best Practices: Mesh Grips vs. Preforms

When you ask lineworkers what differentiates their work from general construction, it’s not surprising that they will typically say they work with big lines at high voltages. Lineworkers take pride in keeping lines up and fixing them when they come down. We know that lines do come down inadvertently, and we also know that the losses resulting from such incidents can be substantial. No amount of regulation will combat these problems, so that’s where best practices come into play. Best practices establish the most common methods to achieve operational success within the parameters of regulations,...

Continue reading

Incident Prevention Magazine

360 Memorial Drive, Suite 10, Crystal Lake, IL 60014 | 815.459.1796

Get the Incident-Prevention Digital Edition App
Get the Incident-Prevention Digital Edition App

Get the iP Digital Edition App


© All rights reserved.
Back to Top