Equipment Operations Archives

Train the Trainer 101: Enforcement of Vehicle Weight and Load Securement Rules

Written by Jim Vaughn, CUSP on June 12, 2018. Posted in Worksite Safety, Train the Trainer 101, Equipment Operations.

In the past few months, I have received comments and inquiries from all over the U.S. regarding what appears to be stepped-up enforcement of both load securement and vehicle weight rules. It’s not unusual that these topics garner attention from the U.S. Department of Transportation when it comes to carriers, but this recent uptick seems to be for smaller commercial vehicles, mechanics trucks, pressure diggers, and bucket and digger derrick trucks. Not all utility safety professionals may be up to date on this topic because DOT issues are not front-burner issues. Typically, the human resources...

Using Technology to Eliminate Aerial Device Overloads

Written by Dan Brenden on February 21, 2018. Posted in Worksite Safety, Equipment Operations.

Knowing bucket capacity and understanding how to read a jib load chart are two critical elements of aerial device operation. While both tasks are fairly straightforward, it is crucial to stay within the allowable capacity of the unit. The platform capacity and material-handling capacity provided by the manufacturer are not recommendations – they are absolute maximum capacities that ensure the machine is not overloaded. Overloading equipment can result in overturning or boom failure. Equipment damage also may occur, resulting in costly repairs and a shortened usable life for the aerial device. A...

Overcoming Barriers to Crane and Rigging Skills Development

Written by Debbie Dickinson on September 11, 2017. Posted in Worksite Safety, Equipment Operations.

The utility industry has high expectations for employing safe work practices and readily invests in equipment and training. Maintaining a workforce with the right skills is a herculean task. Crane operation and rigging skills development presents greater challenges than some other areas because these skill sets typically are not part of the routine work schedule. Individuals with crane operator certification may have fewer than 100 hours of actual operating time in a year, or go more than a year with no seat time or hands-on practice time. OSHA requires employers to ensure that crane operators...

Rope Access Work in Today’s Line Trade

Written by Brian Bourquin on August 8, 2017. Posted in Safety Management, Equipment Operations.

Rope has always been at the core of many operations and is the principal means of removing an injured person from a structure or manhole. In recent years, labor laws have revised and expanded expectations, particularly for worker fall protection on towers. The quest for methods to accommodate these rules has created opportunities for new applications of rope techniques, introducing wider use of rope access and rope descent technologies into the line industry. Rope access describes rope-use techniques that have evolved from centuries-old rope applications incorporating maritime, construction...

June 2017 Q&A

Written by Jim Vaughn, CUSP on June 7, 2017. Posted in Safety Management, Worksite Safety, Q & A, Equipment Operations, Grounding.

Q: We have a group reviewing our personal protective grounding procedures, and they are asking if we should be grinding the galvanized coating off towers when we install the phase grounding connections. What are your thoughts? A: In addition to your question, we also recently received another question about connecting to steel for bonding, so we’ll address both questions in this installment of the Q&A. Your question is about the effectiveness of grounding to towers, and the other question is about the effectiveness of EPZs created on steel towers. We’ll discuss the grounding question first...

Voice of Experience: Inspection, Maintenance and Fall Protection Guidance for Bucket Truck Use

Written by Danny Raines, CUSP on February 15, 2017. Posted in Safety Management, Worksite Safety, Voice of Experience, Equipment Operations.

OSHA 29 CFR 1910.67 is the performance-based standard that covers requirements when using vehicle-mounted elevating and rotating work platforms, including the bucket trucks we use in the electric utility industry. There are many types of buckets, and the task to be performed will determine what type of bucket is required. This standard even covers noninsulated work platforms, sometimes referred to as JLGs, used in civil construction. For clarification, a mobile platform covered under 1910.68, “Manlifts,” is not covered under the 1910.67 standard. Mobile platforms are considered mobile scaffolding...

February 2017 Q&A

Written by Jim Vaughn, CUSP on February 15, 2017. Posted in Safety Management, Leadership Development, Worksite Safety, Q & A, Equipment Operations.

Q: We are a small, distribution-only municipal utility that has been looking into human performance. We are having some trouble understanding it all and how it could benefit us. Most of the training resources are pretty expensive. Can you help us sort it out? A: We can. Human performance management (HPM) has been around in various forms and focuses since before the 1950s. Throughout the ’50s and ’60s, it seems the focus was on companies performing functional analysis and correcting issues that created losses, thereby promoting more efficient and error-resistant operations. In the ’60s and ’70s,...

Creating a Safe Driving Culture

Written by Eduardo Suarez on December 12, 2016. Posted in Safety Management, Equipment Operations.

At ComEd, as with any other electric utility, keeping the lights on is important. However, no job is so important that it cannot be done safely, and that includes driving to and from the job site. Over the past few years, ComEd – a unit of Chicago-based Exelon Corp. and the largest electric utility in Illinois – has worked diligently to educate its drivers about safe driving practices, help them develop skills and learn techniques to avoid accidents, and raise awareness about the many distractions that can occur on the road today. Drivers are encouraged to “treat driving with the respect it...

Rope Access for Live-Line Work

Written by Thomas Penner on December 12, 2016. Posted in Safety Management, Worksite Safety, Equipment Operations.

As a third-generation lineman in the high-voltage utility industry, I can say based on experience that the industry has changed slowly at certain times and radically at others. And yet one thing that has not changed much over the years is the process of performing live-line work on extra-high-voltage (EHV) transmission lines. It still requires the use of live-line tools; it still requires linemen to maintain minimum approach distances; it still requires that linemen possess the knowledge and ability to use tools properly depending on the application, whether it be steel or wood construction;...

Tag: Equipment Operations