Tailgate Safety Topics

Tailgate meetings are a critical communication component of any strong utility safety program. Incident Prevention supplies the utility industry with topics for these important meetings. Each article can be printed out for use in the field or emailed to your crews.

Can't find the Tailgate Topic you're looking for? Just send us an email and we'll have our team of expert utility safety authors get to work on your particular subject!

FREE Subscription to iP Magazine. We'll send you 6 issues a year at no charge!

Wednesday, 28 April 2010 09:37

Line of Fire

Written by 

“Line of fire” is a military term that describes the path of a discharged missile or firearm. It’s the path an object will travel. In utility work there are many objects that have potential to create line of fire exposure.

Awareness is the first defense. Be alert for conditions that may change where the line of fire zone exists, including wind gusts and falling objects.

Perform a job site walk-down to identify missing or weak defenses in areas such as arrow trucks, equipment guards and excavation shoring.

Remind workers to stay clear of hazards by using flagging, barricades, job briefings and three-way communication.

Pay close attention to personnel and objects above, below and in the immediate work area during any job evaluation. No material should be dropped from a pole unless absolutely necessary; this shall be done under the crew leader’s direction. The drop zone shall always be guarded and cleared.

• Never walk under a suspended load.
• Communicate to other workers when entering a lifting/hoisting zone, even if for a short period.
• Balance the load prior to lifting.
• Rigging equipment shall never be loaded in excess of its maximum safe loading limit.

Tensioned Lines
• Be aware and stay clear of tensioned lines such as cable, chain and rope.
• Use only correct gripping devices. Select proper equipment based on size and load limit.
• Be cautious of torque stresses that drilling equipment and truck augers can generate. Equipment can rotate unexpectedly long after applied torque force has been stopped.

Objects with Fall Potential
• Not all objects may be overhead; be especially mindful of top-heavy items and items being transported by forklift or flatbed.

Objects with Roll Potential
• Secure objects that can roll such as tools, cylinders and poles.
• Secure rolling stock using approved binders; apply parking brakes or use chocks to prevent movement.

Pressurized Cylinders and Lines
• Safety standards for compressed cylinders include securing all tanks upright and installing caps when not in use.

High-Pressure Hydraulic Tools
• Only trained or instructed individuals should change fittings on or make modifications to hydraulic tools.

Regulator/Gauge Pressurization
• During the instant that pressure is introduced into a cylinder regulator gauge, stand aside and avoid facing the front or back of the regulator gauge.

Electrical Equipment
• Stand aside when racking breakers into position in case of malfunction and breaker fragments.
• Stay clear of equipment when breakers are being closed remotely.

Spring-Loaded Devices
• Springs come in a variety of shapes and sizes, and can release tremendous energy if compression as tension is suddenly released.

Vehicle/Heavy Equipment
• Use parking brakes and wheel chocks for any vehicle or equipment parked on an incline.
• When working near moving, heavy equipment such as line trucks and cranes, remain in operator’s full view. Obtain operator’s attention prior to approaching equipment.
• Vacate the back of the bucket truck when the boom is being moved or cradled. Get the operator’s attention if you must get into the back of the truck so he or she can stop boom movement.
• Take precautions for all pedestrian and vehicle traffic when positioning vehicles and equipment at a job site.

Working Aloft
• Establish a drop zone, an area below any work being performed aloft. Drop zone size depends on work scope and potential for falling tools and equipment. Keep the drop zone clear of people.
• If work at the structure base is unavoidable, inform the worker above. Make sure work stops. Secure tools and equipment prior to working below.
• Materials should never be dropped from a pole. Use tool bags and hand lines when providing tools and equipment to the employee aloft.
• Stay clear of conductors and equipment actively being worked. Never position yourself or vehicles under them.

About the Author: John Boyle is Corporate Director of Quality, Safety and Environment for Acciona Energy North America, a sustainable energy company that develops and operates wind and solar power facilities. Boyle has more than 26 years of experience in nuclear generation and electric and gas distribution.

Read 20810 times Last modified on Sunday, 07 November 2010 12:53




FREE Subscription to iP Magazine.

We'll send you 6 issues a year at no charge!

Safety Management

Utility safety management is no easy job. Managing personnel, staying current on leg/reg issues, understanding record keeping processes and policy enforcement are only a few of the areas Incident Prevention provides in-depth coverage.

Read Safety Management articles

Personal Protective Equipment

OSHA requires the use of personal protective equipment (PPE) to reduce employee exposure to hazards. FR Clothing, Gloves, Head Protection, Eyewear and Protective Footwear are all PPE.  The  articles listed below discuss their proper use and maintenance. Attend iP Safety Conference & Expo to learn more about the latest PPE products.

Read Personal Protective articles

Tailgate Safety Topics

Tailgate meetings are a critical communication component of any strong utility safety program. Incident Prevention supplies the utility industry with topics for these important meetings. Each article can be printed out for use in the field or emailed to your crews.

Tailgate Safety Topic articles

Worksite Safety

Daily hazards face utility and contractor work crews. Understanding the risks involved, knowing the proper procedures, building a strong culture of open communication and constant awareness will prevent incidents. Our articles on aerial work, underground construction, grounding techniques, high-voltage risks provide utility workers a better understanding of the task at hand.  iP Safety Conferences are another great resource for understanding hazards.

Read Worksite Safety articles

Reader Profiles

Building an effective safety culture requires strong safety leadership.  The iP reader profiles features utility industry safety managers who know what it takes to overcome obstacles that brings their workers home each and every day.

Reader Profile articles

Leadership Development

As our current utility workforce retires, new utility safety leaders are coming onboard all of the time.  Incident Prevention is here to assist in the development of their leadership skills.  Managing people, understanding generational differences, building strong communications skills, establishing accountability are just a few of the subject areas covered in the magazine and at iP Safety Conferences.

Leadership Development articles


Equipment Operations

Safe equipment operations is required on every jobsite.  Utility work requires the use of cranes, derricks, buckets, trenchers, dozers and more.  Learn about the hazards associated with equipment operations in the articles featured below.

 Equipment Operations articles


Grounding systems are designed so they provide the necessary safety functions. Understanding different grounding methods is critical for utility workers.  Incident Preventions relies upon industry experts to author these much needed articles.  For better insight on grounding methods used in the field you may want to attend iP Safety Conference and hear their in-depth presentations.

Read Grounding articles