Tuesday, 02 August 2011 17:39

A Second Look at Safety Glasses

Written by 

Safety glasses weren’t always considered part of everyday utility construction equipment. It was during the mid-1980s when companies really started embracing the use of safety glasses as mandatory personal protective equipment (PPE). Today you cannot step foot on a utility construction site without proper PPE, including safety glasses. Much has been accomplished in eyewear design, fit and comfort over the past 25 years, and many eye injuries have been avoided as a result of these significant changes. The purpose of this Tailgate is to cover some of the basics of safety glasses, as well as address some of the concerns about wearing them.

The Basics
Safety glasses are made with shatter-resistant lenses to protect the eye from flying debris. Although safety lenses may be constructed from a number of materials with various impact resistances, testing standards require that they maintain a minimum thickness at the thinnest point, regardless of material. The following table contrasts the benefits of each lens type typically available in approved safety eyewear.

safety glasses 052611 diagram

Approved industrial eye protection meets the performance standards of ANSI Z87.1. Safety glasses that meet this standard must pass a high-velocity object test for frames and lenses, and meet the criteria for lens thickness, corrosion, flammability and side-shield protection, as well as optical requirements. Glasses that meet the ANSI Z87.1 standard are marked with Z87 on the inside of the frame temple bars.

Issues and Concerns
Although much has been done to ingrain safety glass use into everyday life, many eye injuries still occur on a daily basis. According to the Centers for Disease Control and Prevention, more than 2,000 workplace eye injuries occur every day, with 100 of them resulting in one or more days of lost work. A U.S. Bureau of Labor Statistics survey of workers who suffered eye injuries found that nearly three out of five were not wearing eye protection at the time of the accident. The most common answer given by construction workers with eye injuries when asked why they weren’t wearing safety glasses? “I didn’t think that I needed them!”

Beyond the pain and suffering incurred by the injured employee, additional consequences exist for every eye injury that occurs. The cost of eye injuries to employers is more than $300 million in lost production time, medical expenses and workers’ compensation. The rates of eye injury and lost work time can each be reduced by 50 percent or more when personal protective eyewear is worn, according to a review of the effectiveness of various interventions for preventing work-related eye injuries.

Improving Our Odds
Much research has been done over the years to understand why employees choose not to wear safety glasses. The following suggestions are based on this research with the intent to help drive improvements that would increase usage of safety glasses.

Comfort/Fit: Glasses that are comfortable and fit the wearer are shown to be used more often than those that do not.

Eye Injury Education: Helping employees understand the consequences of eye injuries motivates them to protect their eyes.

Style/Choice: Having a preferred style or allowing employees to make a choice will increase safety glass use.

Enforcement/Reinforcement: Ensuring glasses are worn and providing coaching will help the employee understand the need for eye protection.

Accessibility/Availability: Having an easily accessible supply of safety glasses increases employee usage.

Anti-fogging: Glasses that fog in higher temperatures or during labor-intensive work decrease the employee’s use of eyewear. Anti-fog glasses and anti-fog solutions/wipes have been shown to significantly improve performance, resulting in increased eye protection use.

Although we have seen dramatic improvement in eye protection development and use over the past three decades, an opportunity exists for all of us to do our part and help those we work with protect their eyes. By using the suggestions in this Tailgate, you can have a positive and significant impact on your co-workers and their families.

About the Author: John Boyle is vice president of safety and quality for INTREN, an electric, gas and telecommunication construction company based in Union, Ill. Boyle has more than 27 years of experience, and has worked in nuclear and wind power generation and electric and gas distribution.

Read 9269 times Last modified on Wednesday, 03 August 2011 00:03

Safety Management

Utility safety management is no easy job. Managing personnel, staying current on leg/reg issues, understanding record keeping processes and policy enforcement are only a few of the areas Incident Prevention provides in-depth coverage.

Read Safety Management articles

Personal Protective Equipment

OSHA requires the use of personal protective equipment (PPE) to reduce employee exposure to hazards. FR Clothing, Gloves, Head Protection, Eyewear and Protective Footwear are all PPE.  The  articles listed below discuss their proper use and maintenance. Attend iP Safety Conference & Expo to learn more about the latest PPE products.

Read Personal Protective articles

Tailgate Safety Topics

Tailgate meetings are a critical communication component of any strong utility safety program. Incident Prevention supplies the utility industry with topics for these important meetings. Each article can be printed out for use in the field or emailed to your crews.

Tailgate Safety Topic articles

Worksite Safety

Daily hazards face utility and contractor work crews. Understanding the risks involved, knowing the proper procedures, building a strong culture of open communication and constant awareness will prevent incidents. Our articles on aerial work, underground construction, grounding techniques, high-voltage risks provide utility workers a better understanding of the task at hand.  iP Safety Conferences are another great resource for understanding hazards.

Read Worksite Safety articles

Reader Profiles

Building an effective safety culture requires strong safety leadership.  The iP reader profiles features utility industry safety managers who know what it takes to overcome obstacles that brings their workers home each and every day.

Reader Profile articles

Leadership Development

As our current utility workforce retires, new utility safety leaders are coming onboard all of the time.  Incident Prevention is here to assist in the development of their leadership skills.  Managing people, understanding generational differences, building strong communications skills, establishing accountability are just a few of the subject areas covered in the magazine and at iP Safety Conferences.

Leadership Development articles

 

Equipment Operations

Safe equipment operations is required on every jobsite.  Utility work requires the use of cranes, derricks, buckets, trenchers, dozers and more.  Learn about the hazards associated with equipment operations in the articles featured below.

 Equipment Operations articles

Grounding

Grounding systems are designed so they provide the necessary safety functions. Understanding different grounding methods is critical for utility workers.  Incident Preventions relies upon industry experts to author these much needed articles.  For better insight on grounding methods used in the field you may want to attend iP Safety Conference and hear their in-depth presentations.

Read Grounding articles